Last ned (Gratis)

Abstrakt

A modular discrete event simulation methodology is presented. The
methodology aims at separating the simulation expert from the actual
modelbuilding through the use of parametric modules. Sustainability
aspects in terms of ergonomics and environmental effects (from cradle to
gate) and normal flow parameters stemming from economic sustainability
are incorporated in each module for the discrete event simulation. This
combination enables more user-friendly multidisciplinary decision
support, hence a more sustainable basis than evaluating each of social,
environmental and economic sustainability separately.

Referanser

Ball, P., and D. Love. 1995. The key to object-oriented simulation: separating the user and the
developer. In Proceedings of the 1995 Winter Simulation Conference, (Alexopoulos, C.,
Keebom, K. (Ed.)), pp. 768 - 774, Arlington, Virginia


Banks, J., Carson, J. S., Nelson B. L., and D. M. Nicol. 2004. Discrete-Event System Simulation,
4th ed. Upper Saddle River, New Jersey: Prentice-Hall


Bauer, A., Browne, J., Bowden, R., Duggan, J., and G. Lyons, 1991. Shop Floor Control Systems.
Van Nostrand Reinhold, New York.


Bley, H., Franke, C., Wuttke, C.C., and A. Gross. 2000. Automation of Simulation Studies, in
Proceedings of the 2nd CIRP International Seminar on Intelligent Computation in
Manufacturing, pp.89-94, Capri, Italy.


Cochran, J.K., and H-N. Chen. 2005. Fuzzy multi-criteria selection of object-oriented simulation
software for production system analysis, Computers & Operations Research, No. 32, pp. 153-
168.


Department of Commerce. 2010. How does Commerce define Sustainable Manufacturing?,
http://www.ita.doc.gov/competitiveness/sustainablemanufacturing/how_doc_defines_SM.asp,
accessed 2010-03-11.


Fasth, Å., J. Stahre, and K. Deckner. 2008. Measuring and analysing Levels of Automation in an
assembly system. The 41st CIRP conference on manufacturing systems Tokyo, Japan.


Feifel, S., W. Walk and S. Wursthorn. 2010. LCA, how are you doing today? A snapshot from
the 5th German LCA workshop. International Journal of Life Cycle Assessment, 15, pp. 139-
142.


Finnveden, G., M.Z. Hauschild, T. Ekvall, J. Guinée, R. Heijungs, S. Hellweg, A. Koehler, D.
Pennington and S. Suh. 2009. Recent Developments in Life Cycle Assessment. Journal of
Environmental Management, 91, pp. 1-21.


Frohm J., Lindström, V., Winroth, M. and J. Stahre. 2008. Levels of Automation in
Manufacturing. Ergonomia IJE&HF, 30:3.
ELCD. 2010. European Reference Life Cycle Database
http://lca.jrc.ec.europa.eu/lcainfohub/datasetArea.vm , accessed 2010-03-08.


Gamage, G.B., C. Boyle, S.J. McLaren and J. McLaren. 2008. Life cycle assessment of
commercial furniture: a case study of Formway LIFE chair. International Journal of Life
Cycle Assessment, 13, pp. 401-411.


Heilala, J., Montonen, J., 1998, Simulation-based design of modular assembly system – use of
simulation module library. Eurosim Congress 1998, 3rd International Congress of the
Federation of EUROpean SIMulation Societies. Espoo, Finland.


Heilala, J., V. Saija, H. Tonteri, J. Montonen, B. Johansson, J. Stahre, and S. Lind. 2008.
Simulation-Based Sustainable Manufacturing System Design, In Proceedings of the 2008
Winter Simulation Conference, eds. S. J. Mason, R. R. Hill, L. Mönch, O. Rose, T. Jefferson,
and J. W. Fowler, 1922–1930, Piscataway, New Jersey: Institute of Electrical and Electronics
Engineers, Inc.


Helin, K., J. Viitaniemi, S. Aromaa, J. Montonen, T. Evilä, S. Leino, and T. Määttä. 2007. OSKU
Digital Human Model in the Participatory Design Approach. A New Tool to Improve Work
Tasks and Workplaces. VTT Working Papers VTT-WORK-83. Available at
http://www.vtt.fi/inf/pdf/workingpapers/2007/W83.pdf , accessed 2009-04-13


Johansson, B. 2006 On Virtual Development of Manufacturing Systems – Proposal for a Modular
Discrete Event Simulation Methodology, PhD. Thesis, Department of Materials and
Manufacturing Engineering, Göteborg, Sweden, ISBN 91-7291-653-2, No. 2335.


Johansson, B., Williams, E. J., and T. Alenljung. 2004. Using Autonomous Modular Material
Handling Equipment for Manufacturing Flexibility, in Proceedings of the 2004 Winter
Simulation Conference, (R .G. Ingalls, M. D. Rossetti, J. S. Smith, and B. A. Peters (Ed.)),
Washington DC.


Johansson, B., Fasth, Å., Stahre, J., Heilala, J., Leong, S., Lee, Y.T., and Riddick, F. 2009.
Enabling Flexible Manufacturing Systems by Using Level of Automation as Design
Parameter. In Proceedings of the 2009 Winter Simulation Conference, ed. M. D. Rossetti, R.
R. Hill, B. Johansson, A. Dunkin and R. G. Ingalls, Austin, TX, Dec 13-16, 2009.


Johansson, M., S. Leong, Y. T. Lee, F. Riddick, G. Shao, B. Johansson, A. Skoogh, and P.


Klingstam. 2007. Generic Simulation of Automotive Assembly for Interoperability Testing,
In Proceedings of the 2007 Winter Simulation Conference, eds. S. G. Henderson, B. Biller,
M.-H. Hsieh, J. Shortle, J. D. Tew, and R. R. Barton, 1035-1043, Piscataway, New Jersey:
Institute of Electrical and Electronics Engineers, Inc.


Law, A. M., and W.D. Kelton. 2000. Simulation Modelling and Analysis, 3rd Ed. McGraw-Hill
New York.


Leong, S, Y. T. Lee, and F. Riddick. 2006. A Core Manufacturing Simulation Data Information
Model for Manufacturing Applications. Simulation Interoperability Workshop, Simulation
Interoperability and Standards Organization, September 10-15, 2006, Orlando.


Lind, S., B. Krassi, J. Viitaniemi, S. Kiviranta, J. Heilala, and C. Berlin. (2008a). Linking
Ergonomics Simulation to Production Process Development, In Proceedings of the 2008
Winter Simulation Conference, eds. S. J. Mason, R. R. Hill, L. Mönch, O. Rose, T. Jefferson,
and J. W. Fowler, 1968–1973, Piscataway, New Jersey: Institute of Electrical and Electronics
Engineers, Inc.


Lind, S., B., Krassi, B. Johansson, J. Viitaniemi, J. Heilala, J. Stahre, S. Vatanen, Å. Fasth, and
C. Berlin. 2008b. SIMTER: A Production Simulation Tool for Joint Assessment of
Ergonomics, Level of Automation and Environmental Impacts. The 18th International
Conference on Flexible Automation and Intelligent Manufacturing (FAIM 2008), June 30 –
July 2, 2008.


McLean, C., Y. T. Lee, G. Shao, and F. Riddick. 2005. “Shop Data Model and Interface
Specification.” NISTIR 7198. Gaithersburg, Maryland: National Institute of Standards and
Technology.


Meinert, T. S., Taylor, G. D., and J. R. English. 1999. A modular simulation approach for
automated material handling systems, Simulation Practise and Theory, No. 7, pp. 15-30.


Nance, R. E. 1995. “Simulation programming languages: An Abridged History”, in Proceedings
of the 1995 Winter Simulation Conference, (C. Alexopoulos, K. Kang, W. R. Lilegdon, and
D. Goldsman (Ed.)), pp. 1307-1313, Arlington, VA, Dec 13-16


Nonaka, I. 1994. A Dynamic Theory of Organizational Knowledge Creation, Organization
Science, No. 5 (1).


NSF. 2006. National Science Foundation Report of the Blue Ribbon Panel on Simulation-Based
Engineering Science, Revolutionizing Engineering Science through Simulation, May 2006.


Reap, J., B. Bras, P.J. Newcomb and C. Carmichael. 2003. Improving Life Cycle Assessment by
Including Spatial, Dynamic and Place-Based Modeling. Proceedings of DETC’03 ASME
2003.


Riddick, F, and Y. T. Lee. 2008. Representing Layout Information in the CMSD Specification, In
Proceedings of the 2008 Winter Simulation Conference, eds. S. J. Mason, R. R. Hill, L.
Mönch, O. Rose, T. Jefferson, and J. W. Fowler, Piscataway, New Jersey: Institute of
Electrical and Electronics Engineers, Inc.


SISO. 2009. Pending standard: Core Manufacturing Simulation Data: UML model, SISO-STD-
008-2009. CMSD Product Development Group, Simulation Interoperability Standards
Organization. Available at
http://discussions.sisostds.org/file.asp?file=CMSDBallotingDraft%2DReviewVersion%2Epdf
accessed 2009-07-28.


Visual Components.


Valentin, E. C., and A. Verbraeck. 2002. Guidelines for designing simulation building blocks, in
Proceedings of the 2002 Winter Simulation Conference, (E. Yücesan, C.-H. Chen, J. L.
Snowdon, and J. M. Charnes (Ed.)), pp. 563-571, San Diego, California.






Forrige artikkel      Neste artikkel